Bauma exhibition Munich, Germany 23-29 of April 2007
Welcome to our 270 m2 booth at Bauma 2007, which is located on the out side area F9 and both No. 904A/1. In our booth you can find the latest and most innovation concrete equipment and materials on the market.
Minipav
Mini screed machines with agar to rake off the concrete before vibrating. Available in 3 different models, and 3 different weight options for driving on reinforcement mesh or to be used in connection with steel fibre reinforcement. Big capacity!
Allen Concrete Pavers
Model 255BD is equipped with the patented, vertically adjustable screeding tube which provides quick accurate vertical adjustment. This feature also allows for transition of crown when using the optional crowning attachment. Models 200B, 200BD and 150B have a screeding tube that is adjustable through a bearing slot.
Allen Engineering Corporation
The HD550 is Allen’s very first Hydra-Drive trowel. This rider features 60 inch diameter rotors driven by two radial piston hydraulic motors powered by a 87HP Turbo-Charged Kubota Diesel Engine. The 550 incorporates Allen’s “stretched” frame with 18 in spacing between the pans. This stretched frame helps achieve higher flatter floors by reducing ridning on the first pan pass and this feature also increases productivity.
The COMPODISK has acoustic impedance which matches the concrete thereby imparting its energy into the concrete mass. This causes the concrete to set from the bottom of the slab to the top while maintaining an open surface, allowing the bleed water to escape during the finishing process.
The new Allen 436 €urowalker has its world wide introduction at Bauma in Munich Germany in April 2007. Fitted and adjusted for European markets.
The new Proscreed has its world wide introduction at Bauma in Munich Germany in April 2007.